Large Elevator: Continuous Conveying Equipment for the Seasoning Section of Extruded Snacks

The large elevator is used to continuously feed dried puffed snacks into the drum seasoning machine, and can be integrated with automatic powder spraying machines, oil spraying machines, and seasoning drums to form a seasoning treatment section.The equipment adopts a mesh belt conveying method, which helps products enter the drum stably and maintains continuous feeding during the addition of seasoning powder and oil. It is suitable for the pre-seasoning conveying stage in production lines for snacks, puffed foods, and other similar products.

How is it integrated with the seasoning system?

During production, start the drum seasoning machine and the conveyor first, then feed the puffed food into the drum.Then, start the automatic powder spraying machine and the oil spraying machine, and add seasoning powder and oil according to the process requirements to ensure uniform mixing of the materials in the drum.The conveying capacity of the lifting and conveying section must be matched with the main unit, rollers, and upstream drying section. The actual conveying speed can be adjusted via the variable frequency drive system in accordance with product conditions.

Main Technical Parameters

The large elevator adopts a 4M-FLS mesh belt conveying structure, with a drive power of 0.55kW, a mesh belt width of 470mm, and overall dimensions of 4000×800×1160mm. Its working capacity varies according to the main machine configuration.The drive power of the matching automatic powder spraying machine is 0.75 kW, and its overall dimensions are 1800×460×1050 mm.When selecting the complete production line, configure the system in a coordinated manner based on the specifications of the seasoning drum, product shape, and target production capacity.

Installation, Commissioning, and Maintenance

The equipment should be installed in a well-ventilated and dry area according to the production line layout, and the leveling feet should be adjusted to ensure the machine is stable.The power supply side should be equipped with isolation protection and reliably grounded. After connecting the control wires to the corresponding connectors in the control cabinet, ensure that the connections are secure.During no-load commissioning, inspect the fasteners, conveyor belt, and drive components. If misalignment occurs, correct it by adjusting the screws located beneath the conveyor belt.Do not place hands or foreign objects into the conveyor belt while the equipment is in operation. Before cleaning the powder spraying machine's feed hopper, the machine must be stopped and power disconnected.