ZLSJ-I Screw Conveyor: Sealed Automatic Feeding Equipment for Food Production Lines

The ZLSJ-I screw conveyor is used to automatically transport materials processed by the mixer to the main machine's feeding hopper, reducing manual feeding operations and enhancing the continuity of the production line.The equipment adopts a sealed conveying structure, and the parts in contact with the material, such as the barrel and screw, are made of stainless steel. This helps reduce the likelihood of the material being affected by the surrounding environment during the conveying process, making it suitable for the feeding process at the front end of the main machine for food and related materials.

Sealed feeding and production line connection

The equipment should be positioned on one side of the main unit, with its distance from the main unit adjusted according to the location of the feed inlet.The feeding screw conveys the material from the barrel to the main machine's hopper, while the vibrating motor assists in ensuring stable material discharge.After production ends, the feeding screw can be reversed to discharge residual material from the barrel.Actual production capacity must be matched with the main unit's capacity, material flowability, and process cycle time.

Main Technical Parameters

The equipment is equipped with a 0.75 kW drive motor and a 0.37 kW vibration motor, resulting in a total installed power of 1.12 kW;The feeding screw diameter is φ104mm, the overall dimensions are 3000×850×2400mm, and the production capacity varies according to the main unit configuration.

Installation, Commissioning, and Maintenance

The equipment should be installed on a flat, solid floor and adjusted to a stable condition.After transportation, check whether the screws and electrical components are loose, and confirm that there are no foreign objects inside the barrel;During no-load testing, check whether the motor rotation direction, vibration motor, and transmission components are functioning normally.Power must be disconnected before maintenance or replacement of components. When the equipment is not in use, residual material in the barrel and screw should be cleaned out.