SJ - Triangular Forming Machine: Equipment for Trimming and Cutting Puffed Food Preforms

The SJ-3-Shape Forming Machine is an auxiliary equipment for twin-screw extrusion food production lines, used for conveying, trimming, and cutting the food dough extruded by the main machine.The frame and related components are made of stainless steel, with welded areas properly treated. The equipment features a compact structure and allows adjustment of operating parameters according to product processes and customer requirements.

Main Technical Parameters

The conveying power is 0.75 kW, and it adopts variable frequency speed regulation.The conveying speed should be adjusted according to the discharge rate of the main unit and product specifications to ensure that materials enter the subsequent cutting or forming processes in a stable manner.

Installation and Operation

The equipment is typically installed approximately 1500 mm from the main unit, with adjustments made during trial runs as needed based on site conditions.After powering on, rotate the handle to adjust the gap between the upper and lower conveying rollers. Perform an empty-load test run of the rotary cutting motion system to confirm that the motor rotation direction and mechanical operation are normal.Adjust the guiding device during normal production to ensure consistent material conveyance.

Safety Guidelines

Only for operation and maintenance by qualified professionals.During operation, strictly prohibit any contact between the rollers and your body or clothing. Do not remove the protective cover. The cutting blade must not be used to cut hard materials. Avoid prolonged no-load operation.Power must be disconnected before maintenance.